Fitting - Hettich Easys Bedienungsanleitung

5. Fitting

The Easys System must only be installed by the retailer's or manufacturer's skilled personnel.
During installation, observe the following advice:
• Avoid tripping hazards from incorrect wiring when installing the system and also ensure that cables do not come into contact with
moving parts.
• Cables must not be nipped nor must any damaged cables be used when installing the system.
• Be aware that moisture can get into Easys system components as a result of household cleaning.
• During the installation process, avoid any points at which cables can get trapped
• Gaps for trapping points smaller than 7 mm or larger than 25 mm.
• With the drawer open all the way, allow a minimum distance of 500mm from fixed objects.
min. 500 mm
• Avoid any collision between opposite furniture parts operated by Easys when they open simultaneously. Allow an adequate safety
distance.
NOTE
When dismantling / assembling, work on the electrics or electrical installation must be carried out by qualified electricians.
Hettich Marketing- und Vertriebs GmbH & Co. KG · Vahrenkampstraße 12 -16 · 32278 Kirchlengern · Telefon + 49 52 23/77-0 · www.hettich.com
50
Hettich Marketing- und Vertriebs GmbH & Co. KG · Gerhard-Lüking-Straße 10 · 32602 Vlotho · Telefon +49 5733 798-0 · www.hettich.com
max.