Maintenance And Storage; Sound Pressure; Sound Power; Vibration, Hand/Arm - Toro Emotion 43 Bedienungsanleitung

– before making height adjustment unless
adjustment can be made from the operator's
position.
• Stop the engine and disconnect the spark-plug wire.
– before clearing blockages or unclogging chute.
– before checking, cleaning or working on the lawn
mower.
– after striking a foreign object, inspect the lawn
mower for damage and make repairs before
restarting and operating the lawn mower.
– if lawn mower starts to vibrate abnormally (check
immediately).
• Watch out for traffic when crossing or near roadways.

Maintenance and Storage

• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Do not use pressure cleaning equipment on machine.
• Never store the equipment with gasoline in the tank
and inside a building where fumes can reach an open
flame or spark.
• Allow the engine to cool before storing in any
enclosure.
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and gasoline storage area free
of grass, leaves, or excessive grease.
• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Replace worn or damaged parts for safety.
• Replace faulty silencers.
• If the fuel tank has to be drained, do this outdoors.
• Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
• On multibladed lawn mowers, take care as rotating
one blade may cause others to rotate.
• Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving
blades and fixed parts of the lawn mower.
• To ensure the best performance and safety,
purchase only genuine Toro replacement parts
and accessories. Do not use will fit parts and
accessories; they may cause a safety hazard.

Sound Pressure

This unit has a maximum sound pressure level at the
operator's ear of 81 dBA, based on measurements of
identical machines per EN 836 and ISO 11201.

Sound Power

This unit has a guaranteed sound power level of 96 dBA,
based on measurements of identical machines per ISO
11094.

Vibration, Hand/arm

This unit does not exceed a hand/arm vibration level of
6.8 m/s 2 , based on measurements of identical machines
per EN 836 and EN 1033.
3