Frost Protection; Maintenance And Care - Kärcher K 5.650 Celebration Originalbetriebsanleitung

When transporting in vehicles
 Prior to horizontal transport: Remove
the detergent reservoir from the intake
and close it with the lid.
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
Storing the Appliance
 Park the machine on an even surface.
 Press the disconnect on the hand spray
gun and remove the high pressure hose
from the hand spray gun.
 Push the casing of the quick coupling
for the high pressure hose toward the
rear and disconnect the high pressure
hose from the appliance.
 Insert the hand spray gun with the spray
lance into the holder for the hand spray
gun.
 Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
Prior to extended storage periods, as dur-
ing the winter, also observe the instructions
in the Care section.

Frost protection

Caution
Protect the appliance and its accessories
against frost.
The appliance and its accessories can get
destroyed through frost if there are any wa-
ter residues in them. To avoid damage to
them:
 Completely drain all water from the ap-
pliance: Switch the appliance on with
detached high-pressure hose and de-
tached water supply (max. 1 minute)
and wait, until no more water exits at the
20
Storage
high-pressure connection. Turn off the
appliance.
 Store the appliance and the entire ac-
cessories in a frost-safe room.

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Prior to longer periods of storage, e.g. in
the winter:
 Remove filter from suction hose for de-
tergent and clean under running water.
 Illustration
Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
The appliance is maintenance-free.
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.
Troubleshooting
You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorized customer service.
Appliance is not running
 Pull on the lever of the trigger gun; the
device will switch on.
 Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the mains supply.
– 7
EN
Care
Maintenance
Spare parts