How To Use: Pyrolytic Cleaning - Electrolux KODDP76K Benutzerinformation

Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
Step 4 Install the shelf supports in the
opposite sequence.
The retaining pins on the tele‐
scopic runners must point to the
front.

12.4 How to use: Pyrolytic Cleaning

Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Turn off the oven and wait
until it is cold.
Step 1
C1 - Light cleaning
C2 - Normal cleaning
C3 - Thorough cleaning
Step 2
Step 3
Step 4
Before the Pyrolytic Cleaning:
Remove all accessories.
Pyrolytic Cleaning
Option
- press to select the cleaning programme.
- press to start the cleaning.
After cleaning, turn the knob for the heating functions to the off posi‐
tion.
CARE AND CLEANING
1
Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Enter menu: Cleaning
Duration
1 h 30 min
2 h 30 min
2
.
1 h
31/200