Programming Additional Transmitters; Installing The Wall Bracket - Becker Centronic SunWindControl SWC241-II Montage- Und Betriebsanleitung
Handsender für wind-steuerung
Vorschau ausblenden
Andere Handbücher für Centronic SunWindControl SWC241-II:
- Montage- und betriebsanleitung (36 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2) Programming additional transmitters
1.
Press the programming button of the master transmitter until the re-
ceiver confirms.
2.
Then press the programming button of the new transmitter until the re-
ceiver confirms.
3.
Now press the programming button of the new transmitter again.
4.
The receiver confirms successful programming.
Installing the wall bracket
Wall bracket
Wall bracket
mounting
plate
Unlocking mechanism
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
21 - en
Werbung
Inhaltsverzeichnis
