Installing The Monitor; Desktop Installation - Renkforce 2616623 Bedienungsanleitung

10 Installing the monitor

Tool needed: Cross-head screwdriver.
Turn the screws clockwise to tighten and anti-clockwise to loosen.
A
B
C
D
E
F
G
H
I

10.1 Desktop installation

1. Turn off the monitor and all connected (to be connected) devices, and unplug them from the mains socket.
2. Align the holes on the arms of the desk mounting stand with the corresponding holes on both sides of the back
of the monitor, as illustrated.
3. Tighten the screws (B) in the centre hole of the arms to attach the stand to the monitor.
4. Adjust the monitor to the desired angle and tighten the butterfly screws (A) into the curved slot, as illustrated, to fix
the monitor at that angle. The butterfly screws allow you to adjust and fix the angle of the monitor.
20
Mounting parts included (not to scale)
Butterfly screw for desk stand
Screw for desk (The table has been drilled)
Self-tapping screw for wall
L-shaped wall mounting strip (left and right)
(A)
(B)
(C or D)
Screw for desk stand
Screw for wooden desk
Screw for wall mounting
Plastic wall anchor
Desk mounting stand
x 2
x 2
x 13
x 5
x 13
x 12
x 12
x 1
x 2