Operation - Blodgett 951 Einbau Und Betriebsanweisungen

1
2
3
Figure 8

Operation

900 Series Control Panel
NOTE: Operation is restricted to qualified person-
nel.
LIGHTING
1. Turn the MANUAL CONTROL VALVE (1) to
ON.
2. Press the SAFETY PILOT IGNITION BUTTON
(2).
3. Light the pilot burner with a match. Continue
to hold the safety pilot ignition button for 30
seconds.
OPERATION
1. Set the THERMOSTAT (3) to the desired cook-
ing temperature.
2. Load product when the oven has reached op-
erating temperature.
NOTE: DO NOT allow the pans to touch each
other or the sides of the oven.
To turn the oven off
1. Turn the MANUAL CONTROL VALVE (1) to
OFF.
WARNING!!
The top and front surfaces of the ap-
pliance are hot while in operation. DO
NOT place flammable materials on or
near the appliance.
9