Operation - Blodgett MT1828 Serie Bedienerhandbuch

OPERATION

NOTE: Operation is restricted to qualified person-
To turn the oven on:
1. Turn the manual gas valve to ON. (Gas models
only.)
2. Press and hold the ON/OFF key (2).
3. The display will flash WAIT LOW SET TIME
mmss.
4. The HEAT LIGHT (4) illuminates as the oven
heats to temperature.
NOTE: If in starting, the burner does not ignite
NOTE: If the oven will not start after several at-
1
10
Downloaded from www.Manualslib.com
nel.
directly, the alarm light will illuminate.
Press the RESET knob to restart the
burner. (Gas models only.)
tempts contact a qualified installer.
9 8 7
manuals search engine
To view the cook time setting:
1. Press the TIME key (8). The LED on the key will
light and the display flashes SET TIME mmss.
To display the actual oven temperature:
1. Press the ACT TEMP key (6). The LED on the
key will light and the display reads ACTUAL
nnnn_C.
To view the temperature set point:
1. Press the SET TEMP key (6). The LED on the
key will light and the display flashes SET TEMP
nnnn_C.
To turn the oven off:
1. Press the ON/OFF key (2). The fans will contin-
ue to run until the oven cools down.
2. Turn the manual gas valve to OFF. (Gas mod-
els only.)
6 5 4
Figure 11
9
Operation
Cooking Computer
2
3