Blodgett 951 Einbau Und Betriebsanweisungen Seite 12

Operation
1000 Series Control Panel
1
2
3
Figure 9
NOTE: Operation is restricted to qualified person-
nel.
LIGHTING
1. Turn the MANUAL CONTROL VALVE (1) to
ON.
2. Turn the SAFETY PILOT IGNITION KNOB (2)
to the light position.
3. Light the pilot burner with a match. Continue
to hold the safety pilot ignition knob for 30 sec-
onds.
OPERATION
1. Set the THERMOSTAT (3) to the desired cook-
ing temperature.
2. Load product when the oven has reached op-
erating temperature.
NOTE: DO NOT allow the pans to touch each
other or the sides of the oven.
To turn the oven off
1. Turn the MANUAL CONTROL VALVE (1) to
OFF.
WARNING!!
The top and front surfaces of the ap-
pliance are hot while in operation. DO
NOT place flammable materials on or
near the appliance.
10