capital sports Aeris Bedienungsanleitung Seite 30

EN
2
Insert Trunk line (No. 88) through Seat Post (No.74). Then attach the
Handlebar (No.78) to Handlebar Post (No.74) using 3 Screws (No. 76), 3
Spring washers (No. 10), and 3 washers (No. 11). Tighten with an Allen
Wrench (No.A). (Figure B)
Loosen and pull out the Knob (No. 13). Insert the Handlebar post (No. 74)
with Trunk line (No. 88) into Main frame (No. 81) at desired position, put
back and secure with the Knob (No. 13). Connecting Trunk line (No.88) with
Sensor Wire (No. 89). (Figure A)
30