capital sports Aeris Bedienungsanleitung Seite 29

EN
1
Attach the Front & Rear Stabilizer (No.1 & 12) to the Main Frame (No.81)
using 4 Screws (No.9), 4 Spring washers (No.10) and 4 Washer (No.11).
Tighten with an Allen Wrench (No.A).
Attach Left Pedal (No. 40L) to Left Crank (No. 39L). Turn the Left Pedal
(No. 40L) counter-clockwise with the hand until it is tight, then use Spanner
(No.B) to securely tighten. Attach Right Pedal (No.40R) to Right Crank
(No.39R). Turn the Right Pedal (No.40R) clockwise with the hand until it is
tight, then use Spanner (No.B) to securely tighten.
Note: The Pedals (No.27L/R) are marked "L" and "R" for Left and Right. Make
sure you attach the correct pedal to the corresponding crank.
29