Veripart VPIBKK88 Benutzerinformation Seite 34

• On rst installation (or after turning the door) wait at least four hours
before connecting the appliance to the power. This allows the oil to ow
back into the compressor.
• Ensure that air can circulate around the appliance.
• Pull the plug out of the socket before carrying out any actions on the
appliance (e.g. turning the door).
• Incorrect use of the earthed plug may cause an electric shock.
• This appliance is intended for use as a built-in refrigerator.
• The correct operation of the appliance can only be guaranteed if the
speci ed temperature range is respected. If, as a result of another
installation, the correct ventilation requirements are not met, the appliance
will function correctly, but energy consumption may increase slightly.
• This appliance is not suitable for use with an inverter.
• Do not install the appliance near radiators, stoves, ovens or hobs.
• Do not install the appliance in direct sunlight.
• Do not install this appliance in spaces that are too damp or too cold.
• Do not expose the appliance to rain.
• The total volume of the space in which the appliance is installed divided
by the amount of refrigerant of the appliance must not be less than 8 g/
m³. The amount of refrigerant contained in the appliance can be found on
the type plate.
• The lamp supplied with this appliance is only for use in this appliance and
is not intended for other applications.
• The appliance may not operate optimally if it is in a place where the
ambient temperature is below the minimum or above the maximum of the
temperature range for which the appliance is designed for a longer period
of time. Please refer to the "Climate Range" table below.
33