Ups; Setting - Bluetti EB3A Gebrauchsanweisung

UPS

UPS Bypass Mode: Connect the EB3A with the AC power and the 'UPS' will be on display. Then turn on the
AC output.
When on this mode, the AC power will directly support the loads on AC output ports and charge the EB3A.
Note: Max. output power: 600W.
The AC inverter is disabled under UPS Bypass Mode.
The unit won't enter this mode unless connecting with AC power AND turning on the
AC output.
AC Outlet
AC Charging Cable

Setting

AC Frequency : Under 'Setting Mode' , press the AC power button to switch.
1
AC Frequency: The number of alternating cycles per second in an AC sine wave. The utility frequency in US is
1
generally 60Hz.
11