Fronius RCU 2000 Bedienungsanleitung Seite 16

Connecting up Insert the plug at the end of the remote-control cable into the LocalNet connection
the remote socket (A).
control unit
Fig.2
Fig.4
Keylock switch
Fig.6
(A)
Front view MW/TT 1700/2200
(A)
Rear viewTS/TPS 3200/4000/5000
Keylock switch
(A)
Fig.3
(A)
Fig.5
- The "key" symbol (C) is lit up on the
control panel
- If you still press any of the buttons,
the disabled message "Clo|SEd" will
briefly appear on the displays. The
only parameter that it is possible to
alter (with the adjusting dial) is the
one that was already selected at the
(B)
(C)
time the keylock was activated.
2
Front view TPS 2700
Front view TP 4000/5000
NOTE! When the keylock switch
is in the horizontal position (B), all
the buttons on the control panel
are disabled: