Connection Heating Systems; Handling Of Thermostat And Programming - Warm-on MCS-450 Touch Serie Benutzerhandbuch

DIMENSIONS

CONNECTION HEATING SYSTEMS

1. Electronic thermostat; Supply cable NYM-J
3 x 1.5mm² to energy supply
2. Corrugated hose for temperature sensor (floor) or
cold lead-in (each separately installed)
3. Junction box (in-wall) for installation of two or
more heating units and connection to thermostat.
HANDLING OF THERMOSTAT AND
PROGRAMMING
Week Heating Оп
Period
Time
Mode Clock Power Up Down
1. Power On/off: Press „ " for setting to opera-
tion/for shut-off. Change of operational mode
Switch between "Manual/Program/ECO" by
touching „
plays, „ " on the bottom of the LCD-display
„
The„
2. Setting temperature:
Set temperature und time cannot be chan-
ged when using modes "ECO" and "Program".
Changing the values requires move to mode
"Manual" (touch "M"-key). In this mode, press
„ " and „ " for setting the desired temperature.
When the thermostat is turned оn, press and hold
„ " key for 5 seconds. This allows change between
°F and °C .
3. Adjusting/setting the Clock:
Touch the icon „
Ьу using „ " and „ ". Press „
firm and exit.
4. Locking your Thermostat (child-proof lock):
Press and hold „ " and „ " 5 seconds to lock/un-
lock your thermostat.
5. Setting of time schedules:
In all modes ("Manual"/"Program"/"ECO") save the
settings by touching the „
times to open "Program" mode. The first three steps
are prepared for current time and week. Use „ " and
„ " for adjustment of each value. Press „
switching between 1 - 6 periods, time and temperatu-
re. Finish settings and press „
programming.
PROGRAMMING TIME THERMOSTAT:
Period
Lock
6. Checking the Temperature of floor Sensor:
Press and hold the arrow „ " for 5 seconds to dis-
Floor Temp.
play the temperature of floor sensor.
Set Temp.
Energysaving
Additional item (File: programming time thermostat)
ProgrammaЫe
7. Setting "Advanced Features"
Manual
Turn off thermostat, and press „
simultaneously for five seconds, for opening "Ad-
vanced Features mode". Touch „
of function, and press „ " and „ " for individual
choice. All chosen settings will automatically opera-
ted immediately after restart of thermostat.
"-key. Choosing "Manual" dis-
" is displayed in case of "Program" mode.
" symbol appears when choosing "ECO" mode."
" to set minute, hour and weekday
Monday ...
Saturday
Friday
Time Temp Time
1 06:00 20 °C 06:00
2 08:00 15 °C 08:00
3 11:30 15 °C 11:30
4 13:30 15 °C 13:30
5 17:00 22 °C 17:00
6 22:00 15 °C 22:00
EN
" once more to con-
" key. Touch „ "key four
" key for
" key to exit and save
Sunday
Temp Time Temp
20 °C 06:00 20 °C
20 °C 08:00 20 °C
20 °C 11:30 20 °C
20 °C 13:30 20 °C
20 °C 17:00 20 °C
15 °C 22:00 15 °C
" and „ " key
" key for selection
3