Clean The Vacuum Pads And Spray Nozzle - Geberit AQUACLEAN CAMA Bedienungsanleitung

Clean the vacuum pads and
spray nozzle
Prerequisite
– The vacuum pad is dirty and no longer
adheres to the surface.
– The spray nozzle is dirty.
– The spray nozzle and feed pipe must
be replaced after approximately
6 months.
– The water tank is empty.
1
Demount the spray unit and the feed
pipe to clean them.
18014406687531659 © 01-2023
970.389.00.0(02)
2
Clean the vacuum pad and the spray
nozzle by rinsing them with warm,
clear water and a mild cleaning
agent.
3
Allow the spray nozzle to dry at room
temperature for 30 minutes.
✓ The vacuum pad and spray
nozzle are clean, and the
vacuum pad adheres to the
surface again.
4
Reattach the spray nozzle to your
WC. → See "Attaching the spray
nozzle", page 43.
EN
53