Water Leakage - Situation And Solutions - Geberit AQUACLEAN CAMA Bedienungsanleitung

EN
5
Connect your
Geberit AquaClean Cama using
[Connect now].
✓ The connection is established.
This can take several seconds.
✓ The Geberit AquaClean Cama is
ready for operation.
ATTENTION
Device does not connect to the Geberit
Home app
The Geberit AquaClean device does not
connect to the Geberit Home app within
the next ten minutes or needs to be
connected to a second smartphone.
▶ Disconnect the mains plug and plug it
back in after approximately
30 seconds. Then press the <+>
button on your remote control for
approximately 10 seconds to restart
the pairing process.
48
Water leakage – situation and
solutions
If the device tips over and water leaks out,
the technics assembly could come into
contact with water. Proceed as follows if the
technics assembly comes into contact with
water:
1
Disconnect the device from the
power supply.
2
Ensure that the technics assembly is
not in the vicinity of leaking water.
3
If the technics assembly has come
into contact with water, allow it to dry
out fully.
4
Dry the floor fully to ensure there is
no more residual water.
5
Once the device is dry and there is
no more water in the vicinity, re-
install it according to the instructions
in the user manual.
If the Geberit AquaClean device
shows signs of damage, contact
Geberit or return the device
immediately to Geberit.
18014406687531659 © 01-2023
970.389.00.0(02)