Herunterladen Inhalt Inhalt Diese Seite drucken

Sauber UVC-129322.2 Gebrauchsanleitung Seite 18

Handstaubsauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

3.
While charging, the bar light will blink to indicate the appliance is being charged. When the battery is full, all
three bar lights will light up, after a while, they will all go out.
4.
ffter charging, unplug first, then you can take out the appliance for cleaning or let it rest on charging station.
OPERATION
1. Press either the on/off switch on the appliance's handle or the on/off switch on the handheld unit to turn on
the appliance. The appliance will start running on the "high" suction level.
2. Press the suction level switch on the handle to switch "low" or "high" suction level.
3. To vacuum, push and pull the floor nozzle across the surface you are cleaning. Rotate the appliance slightly to
reach corners more effectively.
4. ffter use, press either the on/off switch on the appliance's handle or the on/off switch on the handheld unit
to turn off the appliance.
Using the crevice nozzle or 2-in-1 tool:
In order to make the best possible use of the crevice nozzle or 2-in-1 tool, you should ideally work with the
handheld device.
1)
Pull the handset out of the holder for the handheld unit by the handle.
2)
fttach the crevice nozzle or the 2-in-1 tool.
NOTE: During use, please pay attention to the dust capacity and do not exceed the "MfX" level indicated on the
dust bin. This appliance is for dry suction only.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
CLEANING AND MAINTENANCE
1.
Before cleaning the product, turn off the power first.
2.
Do not immerse the appliance in water or any other liquids.
3.
Wipe the housing and the accessories with a damp cloth. Occasionally clean the vent holes with a soft brush.
4.
Do not use aggressive chemicals or abrasives.
5.
Do not use the device if the filter is broken or worn out.
6.
Only switch on the appliance again once all parts of the appliance are completely dry.
7.
Store the appliance indoors. Ensure the appliance is at room temperature before operating.
- 17 -

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis