Residual Risks - Stanley FATMAX V20 LITHIUM ION SFMCD700 Bersetzt Von Den Originalanweisungen

ENGLISH
battery packs. Use of any other battery packs may create
Shorting the battery terminals together may cause burns
battery may cause irritation or burns.
above 130 °C may cause explosion.
The temperature „130 °C" can be replaced by the
temperature „265 °F".
This will ensure that the safety of the power tool is
maintained.
battery packs should only be performed by the
manufacturer or authorized service providers.
@
Additional power tool safety warnings
Warning! Additional safety warnings for screw-
drivers.
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
to noise can cause hearing loss.
6
(Original instructions)
Charging improperly or
Service of
Cutting accessory
Exposure
Loss of
This tool produces
a high output torque and without properly bracing the tool
during operation, loss of control may occur resulting in
likely to bend if allowed to rotate freely without contacting
is likely to bend if allowed to rotate freely without
the work by hand or against your body leaves it unstable
and may lead to loss of control.
property.
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not
play with the appliance.

Residual risks

Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
accessories.
any tool for prolonged periods ensure you take regular
At higher speeds, the bit is
.
At higher speeds, the bit
Bits can bend causing
Holding