EuroLite LED TMH-W480 Moving Head Wash Zoom Bedienungsanleitung Seite 28

Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
PAN-TILT Encoder / automatic PAN/TILT correction (Feedback)
With this function, you can correct the PAN/TILT movement to the programmed position.
DMX signal / action if no DMX
With this function, you can "keep" or "clear" the DMX value if there is no DMX-signal.
Display / display turn off
With this function, you can adjust the display characteristics when the buttons are inactive:
ON - Shuts off the display after 30 seconds
OFF - Display always on.
Load default
With this function, you can restore the factory settings of the device. All settings will be set back to the
default values (shaded).
Manual
Test function of each channel
With this function, you can test each channel on its (correct) function.
System
Version
With this function, you can display the software version of the device.
LED temp
With this function, you can display the temperature in the device-head.
Total fixture hours
With this function, you can display the running time of the device.
Partial fixture hours
With this function, you can display the temporary running time of the device since the last switch-on of the
device.
System errors
With this function, you can display error messages.
180° / display reverse
With this function, you can flip the display by 180° for a better view when the fixture is hung from the truss or
a ceiling.
Display language select
With this function, you can select the desired display language (English or Chinese).
28/36 00144878, Version 1.0