Technical Specifications - Siemens SIMATIC ET 200SP HA Originalbetriebsanleitung

Ex-AQ 2xI HART
For use in the USA and Canada
The control drawing for the ET 200SP HA and the ET 200SP is supplied with the
respective power supply module.
The latest edition can also be found at
URL: (https://support.industry.siemens.com/cs/ww/en/)
(https://support.industry.siemens.com/cs/ww/en/)

Technical specifications

Ex-AQ 2xI HART
Supply voltage
Type of supply voltage
Input current
Current consumption (rated value)
Current consumption, max.
Power loss
Power loss, typ.
Power loss, max.
Ex(i) characteristic values
Maximum values for terminals for gas
group IIC
U (no-load voltage), max.
o
I (short-circuit current), max.
o
P (output power), max.
o
C (permissible external capacity), max. 151
o
L (permissible external inductance),
o
max.
U (intrinsically safe input voltage),
i
max.
U (voltage at non-intrinsically safe
m
terminals), max.
Electrical isolation
Electrical isolation channels
Between the channels
Between the channels and the
backplane bus
14
DC supply via Ex-PM-E
65 mA
70 mA
1.2 W
1.3 W
22 V
91 mA
501 mW
nF
4.1 mH
10 V
60 V
No
Yes
Ex-AQ 2xI HART
A5E50377451-AB, 03/2023