Setting The Mixer Functions For Winged Models - ModelCraft 20 65 01 Bedienungsanleitung

All manuals and user guides at all-guides.com
k) Setting the mixer functions for winged models
The control functions of the respective servos have to be coupled (mixed) for operation of delta wing models and
winged models with V-tails, for aileron differentiation or for the adjustment of fowler flaps.
The menu item [MIX] allows you to program three different mixer functions.
On the starting screen, press the [MIX] button.
•
Mixer 1 is preset such that Rotary Controller A is linked to Channel 5 of the receiver.
Mixer 2 is preset such that Rotary Controller B is linked to Channel 6 of the receiver.
This setting can be overwritten at any time.
Mixer 3 has not yet been allocated.
[SW A]: The mixer function is linked to Toggle Switch [A] on the transmitter and can be switched on and off using it.
[SW B]: The mixer function is linked to Toggle Switch [B] on the transmitter and can be switched on and off using it.
[ON]: This mixer is activated as soon as the transmitter is switched on and is independent from the control elements.
When a mixer is permanently switched on, it cannot be switched off on the transmitter.
[OFF]: This mixer function can also be permanently switched off. The mixer is then inactive when the transmitter is
switched on. When a mixer is permanently switched off, it cannot be switched on via the control elements on the
transmitter.
79
Select [Mix 1], [Mix 2] or [Mix 3].
•
In the menu subitem [Switch], the mixer functions [Mix 1], [Mix 2] or [Mix
3] can be permanently switched on ([Switch ON]), permanently switched
off ([Switch OFF]), or allocated to one of the two toggle switches [A] or
[B].
Select [SW A], [SW B], [ON] or [OFF].
•