Product Features; Technical Data - Bosch Heavy Duty GCM 305-216 D Professional Originalbetriebsanleitung

30 | English
angles of –48° to +48° as well as bevel angles of 47° (left-
hand side) to 47° (right-hand side) are possible.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
This product is a consumer laser product in accordance with
EN 50689.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking screw for slide device
(2) Slide device
(3) Transport handle
(4) Protective guard
(5) On/Off switch for worklight
On/Off switch for laser (cutting line indication)
(6)
(7) Lock-off function for On/Off switch
(8) On/Off switch
(9) Handle
(10) Laser protection cap
(11) Laser beam outlet aperture
(12) Retracting blade guard
(13) Guide roller
(14) Saw table
(15) Mounting holes
(16) Insert plate
(17) Locking clamp
(18) Locking knob for various mitre angles
(19) Mitre pre-setting lever
(20) Tilt protector
(21) Laser warning label
(22) Detents for standard mitre angles
(23) Scale for mitre angles
(24) Clamping screw for saw table extension
(25) Saw table extension

Technical Data

Sliding mitre saw
Article number
Rated power input
No-load speed
Soft Start
Laser type
Laser class
1 609 92A 8HY | (24.03.2023)
(26) Workpiece support (flexibly pluggable)
(27) Fixed fence
(28) Adjustable fence
(29) Scale for bevel angle
(30) Angle indicator for bevel angles
(31) Chip deflector
(32) Saw blade
(33) Spindle lock
(34) Transport safety lock
(35) Tilt protector
(36) Length stop
(37) Dust bag
(38) Depth stop adjusting screw
(39) Depth stop
(40) Threaded rod
(41) Screw clamp
(42) Holes for screw clamp
(43) Hex key/slotted screwdriver
(44) Locking screw for the adjustable fence
(45) Clamping wheel for bevel angle
(46) Locking lever for bevel angle
(47) Opening for workpiece support (on power tool)
(48) Opening for second workpiece support (on work-
piece support)
(49) Threaded bolts
(50) Dust extraction adapter
(51) Hex socket screw for mounting the saw blade
(52) Clamping flange
(53) Inner clamping flange
(54) Fastening screws for insert plate
(55) Screw for laser protection cap
(56) Fastening screw for laser housing
(57) Laser housing
(58) Angle indicator for mitre angles
(59) Screw for mitre angle indicator
(60) Screw for bevel angle indicator
(61) Recessed handles
GCM 305-216 D
3 601 M49 0..
W 1200
-1
min 5200
●
nm 650
mW < 1
2
GCM 305-216 D
3 601 M49 0B.
1200
5200
●
650
< 1
2
Bosch Power Tools