Control Unit; Lap Belt; Using The Wheelchair - B+B Ejoy RD Bedienungsanleitung

Ejoy RD | Electric wheelchair
Ejoy RD XL | Electric wheelchair
Ejoy RD XXL
| Electric wheelchair
Length adjustment of armrest
• First take the sideguards out of the bracket.
• Loosen the armrest screws (Fig. 25).
• Move these to the required position
• Screw the armrest firmly back onto the sideguard.
25.
Make sure that the adjustment is only within the
marked area!

3.5.9. Control unit

The control unit can be fitted below the armrest, either on the right or
left. The adjustment must be carried out by your dealer wheelchair, to
guarantee that the wheelchair operates safely.
26.
.
Note that the cable to the control unit must be
relocated. Consult a specialist to do this.
Armrest gap
You can adjust the position of the control unit to your forearm length
• Loosen the hand screw on the outside of the sideguard
• Move the control unit to the required position and re-tighten the
27.
screw (Fig. 26).
Swivel
• The control unit can be swivelled to the side (Fig. 27). It clicks into
the armrest extension and can be swung fully outwards.
Using the control unit is explained in
Chapter 4, "Using the wheelchair".
82
Electric wheelchair |
Electric wheelchair |
Electric wheelchair |

3.5.10. Lap belt

The lap belt is fitted to the seat frame.
• Adjust the belt length to suit your requirements, by positioning the
buckle accordingly.
• Fasten the belt with the buckle (Fig. 28).
• Open the belt by pressing the red button on the buckle.
4.

Using the wheelchair

Once you have adjusted the wheelchair to your personal needs, famil-
iarise yourself with the functions of the control unit. This is described
in Chapter 4.1.
Bischoff & Bischoff GmbH - 2023 - 05 - 23 - Revision: 3
Ejoy RD
Ejoy RD XL
Ejoy RD XXL
28.
83