Use Of Other Displays - Batavus ION Bedienungsanleitung

Resetting Trip 1 will be automatic when the bicycle is not used for more than
2 hours. Trip 1 can also be reset manually by keeping the set button
pressed for a long time. You can only reset Trip 2 manually by keeping the
set button pressed for a long time.
3.9

Use of other displays

Your display acts as an immobiliser, which makes it impossible to
install any display on your E-bike and make full use of it.
Your display has a unique code that
corresponds with the respective E-bike. If
you want to switch on the support or the
lights, it is checked whether the display
and the bicycle belong together. If not, the
message E0014 appears and the support
and the lights cannot be switched on.
If you have two E-bikes with the same
type of display, it is possible to register
both displays for both bicycles.
Your certified E-bike dealer can do this for
you. Then you can use both displays on
both bicycles.
55
0%
55
E - 0 0 1 4