Inhaltsverzeichnis
Werbung
17
NEUTRON User Manual
Advanced Features
Access
Change Assignable Output (ASSIGN)
Hold OSC SYNC
Envelope Retriggering
Hold OSC SYNC
Note Priority
Hold OSC SYNC
Restore Defaults
Hold PARAPHONIC,
KEY TRK and OSC SYNC
on power on.
OSC 1 Shape (Blend or Switched)
Hold OSC1 RANGE
OSC 2 Shape (Blend or Switched)
Hold OSC2 RANGE
OSC 1 Tuning
Hold OSC1 RANGE
OSC 2 Tuning
Hold OSC2 RANGE
Pedal Mode
Hold OSC2
Poly Chain mode
Hold PARAPHONIC
LFO (Blend or Switched)
Hold LFO KEY SYNC
LFO Depth
Hold LFO KEY SYNC
LFO one-shot mode
Enable KEY SYNC,
then Hold LFO KEY SYNC
LFO envelope retrigger
Hold LFO KEY SYNC
LFO key rate track
Hold LFO KEY SYNC
LFO MIDI Clock Sync
Hold LFO KEY SYNC
VCF mod source
Hold filter (VCF) MODE
VCF mod depth
Hold filter (VCF) MODE
Hold filter (VCF) MODE
Action
Use RANGE buttons to change Output function
The KEY TRK button toggles the retriggering mode
Press the VCF mode button to cycle through the
options
The process only takes a moment. When you see
the LED sweep you can let go of the buttons
PARAPHONIC will either throb or flash. Push to
toggle mode
PARAPHONIC will either throb or flash. Push to
toggle mode
LFO shape LEDs shows tuning with respect to the
last played MIDI note
LFO shape LEDs shows tuning with respect to the
last played MIDI note
KEYTRK will toggle the state of of the mode
The LED will flash once in mono mode - twice
quickly in duo mode
PARAPHONIC will either throb or flash. Push to
toggle mode
Press RANGE +/- to select the output depth.
Enable KEY SYNC. Press the VCF MODE button to
cycle through the options.
the KEY TRK button LED will indicate the LFO
retrigger mode
Long press KEY TRK whilst playing a note to set
that note as the LFO base note. Long press KEY
TRK when no note is played to disable
Press OSC SYNC to toggle the state
Press VCF MODE to toggle between setting the mod
source & depth
Press VCF MODE to toggle between setting the mod
source & depth
Press RANGE +/- to select the amount of depth
Result
LFO shape displays selected option.
When the KEY TRK LED is on - retriggering
is enabled
The VCF mode LEDs will indicate the note priority.
(HPF
) = high note priority - (BPF
) = last
note priority - (LPF
) = low note priority.
Defaults restored
OSC 1 Shape mode will toggle. Blend or switch
OSC 2 Shape mode will toggle. Blend or switch
Top center LFO Shape LED indicates that the
oscillator is in tune
Top center LFO Shape LED indicates that the
oscillator is in tune
When the KEYTRK LED is lit - OSC 2 will play the
last note played before being enabled.
When KEYTRK LED is not lit - OSC2 will
behave normally
Poly-Chain mode toggled on/off
LFO Shape mode will toggle. Blend or switch
LFO shape LED wheel will indicate the current LFO
depth: 1% to 100% (64 steps)
The VCF mode LEDs will indicate the LFO one-shot
mode: HPF = Disabled - BPF = Enabled -
On - LFO will retrigger for overlapping notes
(staccato), Off - LFO will not retrigger for
overlapping notes (legato).
Sets that note as the LFO base note
The OSC SYNC button LED will indicate the MIDI
clock sync mode. On - LFO rate sync'ed to MIDI
clock. Off - LFO rate free-running
LFO shape LED wheel will indicate the current
mod source selection:
Not used
Disabled
Note-On velocity
Mod-wheel (CC1)
Aftertouch
Press RANGE +/- to select the output
LFO shape LED wheel will indicate the current VCF
mod depth: 1%−100% (64 steps)
Exit
Hold OSC SYNC
Hold OSC SYNC
Hold OSC SYNC
None
Hold OSC 1 RANGE
Hold OSC 2 RANGE
Hold RANGE 1
Hold RANGE 2
Hold OSC2
Hold PARAPHONIC
Hold LFO KEY SYNC
Hold LFO KEY SYNC
Hold LFO KEY SYNC
Hold LFO KEY SYNC
Hold LFO KEY SYNC
Hold LFO SYNC
Hold filter (VCF) MODE
Werbung
Inhaltsverzeichnis
