Technical Data; Before The First Use - Cloer 5981 Bedienungsanleitung

Technical Data

Type
598
599

Before the first use

• Read these operating instructions carefully before
using the appliance for the first time.
• Remove all packaging elements and stickers, but not
the rating plate.
• Place the filter coffee maker on a dry, flat, nonslip surface.
• Prior to brewing coffee for the first time, run the cof-
fee maker only with water once or twice (omitting
GB
coffee powder and filter insert).
• When filling the water tank with water, avoid the
MAX marking being exceeded.
• Place the carafe with the filter insert on the "Keep
Warm" plate and press the ON/OFF button.
• Switch off the coffee maker after the brewing process
and pour away the water.
CE Label / Safety information
The appliance meets the requirements
of the applicable EC directives.
The appliance is designed for indoor
domestic use only.
CATUION: When filling the water
reservoir with water, avoid the MAX
marking being exceed. A possible
bubbling over can cause a danger of
a scald. Also, water might be running
out of the overflow hole.
ATTENTION! Always unplug the
appliance when not in use and before
cleaning.
Operation
• Plug cord into a standard electrical outlet.
• Fill the reservoir with cold water.
- Either you remove the water reservoir and keep it
open with your thumb. Fill the reservoir with desired
amount of water using its markings inside.
- Or you use the carafe's scale to fill the reservoir with
water.
• NOTE: Your coffee machine is designed for a maxi-
mum of 5 cups. The bottom of the metal ring corre-
sponds to the 5-cups-marking.
5 cups
= MAX
8
Volt Hz
230 50
• When filling the water reservoir with water, avoid the
MAX marking being exceeded. A possible bubbling
over can cause a danger of scald. Also water might be
Watt
running out of the overflow hole.
800
• Place the filter insert on the empty glass carafe.
800
• Place a filter bag # 1x2 into the filter holder and add
the desired amount of ground coffee.
• Place the filter lid on the filter insert.
• After that place the glass carafe with the filter insert
on the "Keep Warm" plate and switch on the appliance.
• Now the appliance is in operation for 40 minutes
(brewing coffee + „Keep Warm" time) and then shuts
off automatically.
Coffee machines used with non-insulated containers
(e.g. glass jugs) must be switched off within 40 minutes
of completing the brewing process in accordance with
Your Cloer filter coffee machine therefore has an opera-
ting time (coffee brewing + heating time) of 40 minutes
in total, i.e. the heating plate stays on for approx. 30-35
minutes after brewing, depending on the amount of
coffee used. When the heating cycle is over, the on/off
Please be aware that the on/off switch will not return
to the OFF position. Be sure to always reset the switch
to the OFF position when the heating period is over or
when you no longer need the appliance.
• The coffee is done when it has completely run through
and then is kept warm on the „Keep Warm" plate.
• Always switch the ON/OFF button to the OFF posi-
tion when the „Keep Warm" time is over.
• By pushing the ON/OFF button you can shut off the
coffee maker manually before the end of 40 minutes
keep warm function.
The filter lid fits on the filter insert as well as on the
glass carafe. After finishing the brewing process
you can place the filter lid on the glass carafe.
Decalcification
It is advisable to decalcify to the coffee machine when
using calcareous water (depending on the degree of
hardness of the water, between 3-4 weeks). A regular
decalcification will assure constant quality, low electrical
consumption and a longer life of the machine. Use for this
a normal liquid descaler and read the safety instructions.
For the decalcification with citric acid or vinegar,
take into consideration:
• Fill the coffee maker with 3 cups of water and approx.
75ml citric acid or vinegar and turn the appliance on.
• After the decalcification, operate the appliance with
clear water twice in order to rinse the appliance.
Heating time
Regulation (EU) No. 801/2013.
switch indicator light turns off.
Information