Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Commissioning, operation
With the instructions described below, the LED will light up green for approx. 5 s after
successful activation.
1.
Use the activation magnet to actuate the reed switch in the location shown.
EN
LED lights up red approx. 1 s.
2.
Within 3 s, move the activation magnet over the reed switch a second time
to start activation.
The LED lights up green for approx. 1 s and the LoraWAN
starts with the authorisation.
→ Without this step, the instrument remains deactivated. This second step
3.
After successful activation and a successful LoRa
lights up green for 5 s.
4
After successful activation and a failed LoRa
up red for 5 s. The instrument remains activated and repeats the LoRa
Join Process based on the instrument configuration data.
5.4 Deactivating NETRIS
The storage mode is used in order to deactivate all functions, in particular the LoRa
communication, during storage and transport. Delivery of the instrument is made in storage
mode. The storage mode can be reactivated, at any time, using a magnet.
The deactivation of the WIKA model NETRIS
mode works with an activation magnet. With the instructions described below, the LED will
light up red for approx. 3 s after successful deactivation.
1.
Use the activation magnet to actuate the reed switch in the location shown.
LED lights up green approx. 1 s.
2.
Within 3 s, move the activation magnet over the reed switch a second time
to start deactivation.
The LED lights up red for approx. 1 s and the deactivation process starts.
→ Without this step, the instrument remains activated and a reset (join
3.
Then move the activation magnet over the reed switch a third time to
complete the deactivation.
The LED lights up red for approx. 3 s, after which the instrument is put into
storage mode.
→ Without this step, the instrument remains activated and a reset (join
20
prevents an accidental activation of the instrument.
®
3 (storage mode)
request, initialisation, etc.) is triggered.
request, initialisation, etc.) is triggered.
®
®
3 radio unit from active mode to storage
WIKA operating instructions, model WIKA NETRIS
®
Join Process
®
Join Process, the LED
Join Process, the LED lights
®
®
®
3
Werbung
Inhaltsverzeichnis
