Dismounting, Return And Disposal - WIKA NETRIS 3 Betriebsanleitung

7. Maintenance and cleaning / 8. Dismounting, return ...
1. If necessary, disable data transmission for cleaning.
2. Prior to cleaning, properly disconnect the instrument from the WIKA measuring
instrument.
3. Use the requisite protective equipment.
EN
4. Clean the instrument with a moist cloth. The antenna connection must not come into
contact with moisture!
CAUTION!
Damage to property
Improper cleaning may lead to damage to the instrument!
▶
▶
▶
5. Wash or clean the dismounted instrument, in order to protect persons and the
environment from exposure to residual media.

8. Dismounting, return and disposal

DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
▶
WARNING!
Physical injuries and damage to property and the environment through
residual media
Residual media at the dismounted instrument can result in a risk to persons,
the environment and equipment.
▶
▶
▶
8.1 Dismounting
Disconnect the connector on the WIKA measuring instrument from the NETRIS
accordance with the orientation guide, see chapter 5.1 „Mechanical mounting"
24
Do not use any aggressive cleaning agents.
Do not use any hard or pointed objects for cleaning.
Do not use solvents or abrasives for cleaning.
The dismounting of the instrument may only be carried out by skilled
personnel.
Only dismount the pressure measuring instrument/measuring assembly/test
and calibration installations once the system has been isolated from power.
Use the requisite protective equipment.
Observe the information in the material safety data sheet for the
corresponding medium.
Wash or clean the dismounted instrument, in order to protect persons and
the environment from exposure to residual media.
WIKA operating instructions, model WIKA NETRIS
®
3 in
®
3