Design And Function; Scope Of Delivery; Transport, Packaging And Storage - WIKA Unitrans A-IUR-1 Betriebsanleitung

4. Design and function / 5. Transport, packaging ...

4. Design and function

4.1 Description
The indicator serves as intrinsically safe electrical equipment for the visuali-
sation of process data. The electronic components are built into a plastic
GB
case. This case serves as a cover for the later intrinsically safe equipment.

4.2 Scope of delivery

Case with window
■
Built-in electronics with LC display
■
Mounting screws for indicator module
■
Mounting screws for the retaining string
■

5. Transport, packaging and storage

5.1 Transport
Check the indicator module for any damage that may have been caused by
transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport
(e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: See chapter 3 "Specifications"
Store the indicator module in its original packaging in a location that fulfils the
conditions listed above. If the original packaging is not available, pack and
store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag
containing a desiccant inside the packaging.
10 WIKA operating instructions unitrans indicator module model A-IUR-1
