General Safety Information; Technical Data; Type Designation - WÜRGES HV-Serie Montage- Und Betriebsanleitung

3.4. General Safety Information

Vibrator motors generate vibrations. The operator of vibration systems
must protect employees against actual or possible risks to their health
and safety from the effects of vibrations.
Würges Vibrationsmotoren GmbH accepts no responsibility for damage
to property or personal injury if technical changes are made to the
product or the information and regulations in these operating
instructions are not observed.
Live parts can cause serious or fatal injuries.
When working on the motors, they must be disconnected from the
electrical network. Proceed as follows:
The vibrator motors must not be touched during operation or shortly
after switching off. The surface temperature of themotor can reach such
high values during operation that there is a risk of burns.
Always tighten screws / nuts with a torque wrench! For the required
tightening torques for fastening, see page 12, the maximum tightening
torques for the unbalance fixing (pages 18 & 20) and the terminal board
nuts (page 15) must be observed.
Vibrating motors of the HV / FV / IV / INV / VFL / HF series must not be
used in potentially explosive areas.

4. Technical Data

4.1. Type Designation

1. Turn power off
2. Secure against being switched on again
3. Check that there is no voltage
4. Let the motor cool off
5. Ground the motor
62