Personal Safety - EASYmaxx 03546 Originalbetriebsanleitung

Cordless Multi-Function Screwdriver
c) Keep power tools away from rain or
moisture. Water entering a power tool
will increase the risk of electric shock.
d) Do not misuse the connecting cable
for carrying, suspending or un-
plugging the power tool. Keep the
connecting cable away from heat,
oil, sharp edges or moving parts.
Damaged or entangled connecting ca-
bles increase the risk of electric shock.
e) When operating a power tool out-
doors, only use extension cables
that are also suitable for outdoor
use. Use of an extension cable that is
suitable for outdoor use reduces the
risk of electric shock.
f) If operating the power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
g) Hold the power tool only by the
insulated gripping surfaces as the
grinding surface may hit the con-
necting cable of the tool. Damage to
a "live" wire may make metal parts of
the power tool "live" and could give the
operator an electric shock.

3) Personal Safety

a) Remain alert, pay attention to what
you are doing, and use common
sense when operating a power tool.
Do not use a power tool while you
are tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operat-
ing power tools may result in serious
personal injury.
b) Wear personal protective equip-
ment and always wear safety gog-
gles. Wearing protective equipment
such as a dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce the risk of personal injury.
c) Avoid accidental start-up. Ensure
that the power tool is switched off
before connecting it to the power
supply and / or battery, picking up
or carrying the power tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting tools or
wrenches before the power tool is
switched on. A tool or wrench left at-
tached to a rotating part of the power
tool may result in injuries.
e) Avoid adopting an abnormal pos-
ture. Maintain a secure footing and
balance at all times. This enables
better control of the power tool in
unexpected situations.
f) Wear suitable clothing. Do not wear
loose clothing or jewellery. Keep
hair, clothing and gloves away
from moving parts. Loose clothing,
jewellery or long hair may become
entangled in moving parts.
g) If dust extraction and collection
equipment can be mounted, it
should be connected and used
properly. Use of dust extraction can
reduce dust-related hazards.
h) Do not have a false sense of secu-
rity and do not ignore the safety
rules for power tools even if you
are familiar with the power tool
after using it many times. Careless
actions can result in serious injuries in
fractions of a second.
4) Power Tool Use and Care
a) Do not overload the power tool.
Only ever use the designated power
tool for the activity that is to be per-
formed. With the appropriate power
tool, you will work better and more
safely in the specified power range.
b) Do not use a power tool whose
switch is defective. Any power tool
that cannot be controlled with the
EN
19