Specifications - Makita DTD134 Betriebsanleitung

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Star marking
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 Bit

SPECIFICATIONS

Model
Machine screw
Capacities Standard bolt
High tensile bolt
No load speed (min
Impacts per minute
Overall length
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS IMPACT DRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
Explanation of general view
11 Sleeve
12 Bit-piece
13 Hook
14 Screw
15 Standard bolt
16 Fastening torque
17 Proper fastening torque
18 Fastening time
19 High tensile bolt
20 Limit mark
–1
)
BL1415/BL1415N
1.2 kg
ENE033-1
GEA010-1
GEB054-3
DTD134
4 mm – 8 mm
5 mm – 14 mm
5 mm – 12 mm
0 – 2,400
0 – 3,200
138 mm
D.C. 14.4 V
BL1430/BL1440/
BL1450
1.4 kg
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
21 Screws
22 Rear cover
23 Spring
24 Arm
25 Recessed part
26 Carbon brush cap
27 Lead wire
28 Hole
DTD146
0 – 2,300
D.C. 18 V
BL1830/BL1840/
BL1815/BL1815N/
BL1840B/BL1850/
BL1820/BL1820B
1.3 kg
BL1850B
1.5 kg
ENC007-9
5