Maintenance, Cleaning And Repair; Contact Information - Konig & Meyer 21376 Nutzungsinformation

Maintenance, cleaning and repair

u Maintenance: Regularly check that the screw connection is tight.
u Cleaning: Use a slightly damp cloth to clean the distance rod. Do not use chlorinated or
u
abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Repair any damage immediately and stop using the distance rod. Repair work may
u
only be carried out if you have the necessary knowledge. If any parts are missing, contact the
u
manufacturer at www.k-m.de. Here you can find a corresponding spare parts list by entering
u
the article number on the type label. Use this page to reorder missing or damaged compo-
u
nents.
Fault and troubleshooting
Fault/cause
Sound system wobbles
Extension tube slides in
under a load
Speaker cannot be placed
on expanding mandrel
Speaker is not adequately
fixed in place
Speaker is difficult to remove
from expanding mandrel
Storage, disposal
Store the distance rod in a dry place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.

Contact information

KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Telefon: +49 9342/8060
Telefax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
Check/Remedy
● Check the stability of the sound system.
● Check connection between base and distance rod.
● Secure the safety hook in place.
● Tighten the clamping screws.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
21376-000-55 Rev.04 03-80-951-00 2/23