Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical data
Material
Load capacity
Dimensions and
adjustment range
Packing
Weight
Maintenance, cleaning and repair
u Maintenance: Regularly check that the screw connection is tight.
u Cleaning: Use a slightly damp cloth to clean the adapter sleeve. Do not use chlorinated or
u
abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Repair any damage immediately and stop using the adapter sleeve. Repair work may
u
only be carried out if you have the necessary knowledge. If any parts are missing, contact the
u
manufacturer at www.k-m.de. Here you can find a corresponding spare parts list by entering
u
the article number on the type label. Use this page to reorder missing or damaged compo-
u
nents.
Fault and troubleshooting
Fault/cause
Adapter sleeve cannot be
placed on the stand either
entirely or in part
Speaker cannot be placed
on expanding mandrel
Speaker is not adequately
fixed in place
Speaker is difficult to remove
from expanding mandrel
Adapter sleeve: steel, powder-coated, black
Distance bolts, screws: steel, galvanized
Clamping sleeve, clamping elements: plastic, gray
Tapered cone, clamping screw: plastic, black
50 kg
Dimensions: (W) 270 x (D) 93 x (H) 54 mm
Expanding mandrel: Diameter 35-37 mm
Adapter sleeve: Diameter 36 mm (inside)
(W) 295 x (D) 85 x (H) 55 mm
0.6 kg
Check/Remedy
● Check whether the clamping screw has been screwed out
●
far enough.
● Check the rod diameter of the stand used.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
Werbung
Inhaltsverzeichnis
