Asanetwork - Hella Gutmann SEG V Bedienungsanleitung

7. | Device configuration
17. Enter the user name of the sender.
18. Close the virtual keypad with
19. Open the virtual keypad under Password with
20. Enter the user password.
21. Close the virtual keypad with
22. Close the User login window with
The input will be saved automatically.
ð Reports can be sent via e-mail now.

7.7.5. Asanetwork

Asanetwork is is the cross-brand communication standard for linking workspaces in automotive shops. Asanetwork es-
tablishes the connection and, thus, the option to exchange data between the procedures and systems used in the repair
shop, such as inspection and testing devices (engine diagnostics, exhaust-emission check, brake test stand, air condition-
ing service station, headlight aiming device, etc.) and the commercial software in the office (DMS – Dealer Management
System). The compatibility of these devices is required.
7.7.5.1. Installing the Network Manager
The use of the function Asanetwork requires the network manager "netman" installed on the shop PC. This software is a
product of a third-party supplier and can be acquired under the following link:
https://workshop-net.net/netman/
The use of the software requires merely 5 steps:
1. Download and install the network manager.
2. Start the network manager and go to Documented text > Start asanetwork and connect with the SEG V.
The connected SEG V is indicated under Connected services.
3. The purchase of the device license requires a registration. For this select the tab >License< in the drop-down menu
and confirm the selection Click here for free registration under Free registration required.
This option is indicated only if step 2 was successful.
4. Enter the license, that has been transmitted by e-mail, under License activation for the online activation and click to
>Save<.
ð The license is activated now.
7.7.5.2. Processing an Asanetwork Order in the SEG V
If an order is created in the commercial software, call up the configured order in the headlight aiming device as follows:
1. Select Documented test > Vehicle selection > Start asanetwork in the main menu.
The info window shows that the dial-up to the asanetwork controller is being established.
A list of the created asanetwork orders appears.
106
.
.
.
.
Hella Gutmann
SEG V