Herunterladen Inhalt Inhalt Diese Seite drucken

Bosch 0 607 452 603 Anleitung Seite 15

Druckluftwerkzeuge
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Pay attention to the direction of rotation that
is set before switching on the pneumatic tool.
For example, when a screw is to be loosened and
the direction of rotation is set so that the screw is
tightened, this can lead to a strong torque reaction
of the pneumatic tool.
Do not run the pneumatic tool while carrying
it at your side. A rotating bit could become entan-
gled with clothing and injury may result.
If you wish to operate the pneumatic tool in a
suspension or clamping device, make sure
that the pneumatic tool is first mounted in the
device before you connect it to the air supply.
In this way you avoid starting the tool accidentally.
Regularly check the condition of the hanging
hoop and the hook of the suspension device.
Some dust created by power
WARNING
sanding, sawing, grinding, drill-
ing, and other construction activities contains
chemicals known to cause cancer, birth defects,
or other reproductive harm. Some examples of
these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks and cement and other
masonry products, and
Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well-ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
3 609 929 A78 • 8.8.06
Symbols
The following symbols could have meaning for the use
of your pneumatic tool. Please take note of the symbols
and their meaning. The correct interpretation of the
symbols will help you to use the pneumatic tool in a bet-
ter and safer manner.
Symbol
Meaning
W
W
Unit of power
possibly also "Hp" for
"horsepower"
Nm
Nm
Unit of energy (torque)
possibly also "ft-lbs" for
"foot-pounds"
kg
kg
Unit of mass (weight)
possibly also "lbs" for "pounds"
mm
mm
Unit of length
possibly also "in" for "inch"
min
min
Unit of time
s
s
Unit of time
bar
bar
Unit of air pressure
possibly also "psi" for
"pounds per square inch"
l/s
l/s
Unit of air consumption
possibly also "cfm" for
"cubic feet per minute"
-1
min
rpm
Unit of rotational speed,
e.g., no-load speed
dB
dB
Unit of relative loudness
n
Symbol for no-load speed
0
Ø
Symbol for diameter,
e.g., screw diameter
Symbol for direction of rotation
(left rotation, right rotation)
Symbol for square drive
Symbol for the direction of action
Read all safety warnings and
all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fire and/or
serious injury.
Use safety equipment. Always
wear eye protection. Safety
equipment such as a dust mask,
non-skid safety shoes, a hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.
English | 15

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

0 607 452 6050 607 452 604

Inhaltsverzeichnis