Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 67

Cleaning the ploughshare
Clean the ploughshare to remove any debris, mud, peat, plant residues etc that may have built up during use.
Lack of cleaning will limit the ejector range, therefore, as well as affecting the machine's operation, it also
causes serious mechanical damage.
UN41 0059CF
Proceed as outlined below.
1) Lift the work vehicle.
2) Loosen the wing nut (A).
3) Turn the lock lever (B).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
Tyres check
Check the tyres for wear and if they feature tears or signs
of ageing, they must be replaced.
Cleaning the work vehicle
Clean the work vehicle with a high-pressure water jet
and, if necessary, with approved detergents.
The liquid used for washing could be hazardous for the
environment due to the presence of pollutants such as
detergents, oils, etc., therefore do not simply dump the
wastewater; dispose of it in suitable areas equipped with
separation devices for the pollutants.
English language
MAINTENANCE INFORMATION
5) Clean the ploughshare with the tool provided (C).
6) Once the cleaning is complete, replace the plough-
share in the working position and check that the lock
lever (B) is holding it in position.
7) Tighten the wing nut (A).
Check tyres pressure and restore if necessary (see "Speci-
fications").
The pressure must be checked with the weight of the
work vehicle entirely on the ground and with nothing
and nobody on the work vehicle.
Dry with compressed air and lubricate the components
shown (see "Lubrication diagram").
29
7
Use and maintenance