Checchi & Magli BABY COMPACT Bedienungs- Und Wartungsanleitung Seite 55

Proceed as outlined below.
Adjust the planting units so that the seedlings are kept
(C) 10 - 12 cm away from tractor wheel.
1) Loosen the nuts (A).
2) Slide the planting unit along the frame (B) until the
required plating spacing is obtained.
Planting depth adjustment
UN41 0053CF
Proceed as outlined below.
1) Turn the handwheel (A) to increase or decrease the depth of the furrow.
Adjusting the small wheel load
A
UN41 0054CF
English language
ADJUSTMENT INFORMATION
3) Tighten the nuts (A).
4) Loosen the nuts (D).
5) Move the seats to the midline of the respective plant-
ing unit.
6) Tighten the nuts (D).
Proceed as outlined below.
1) Turn the knob (A) clockwise to increase the load of
the small wheel (B) on the ground.
Turn the knob anticlockwise to deincrease the load
of the small wheel on the ground.
17
A
Use and maintenance
5