Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PERGOLA 60 io RGS
PERGOLA 50 io RGS
3.6.3.Restoring the original configuration
CAUTION
• Only switch off power (double cutout) for the driven product to be reset.
• This reset deletes all programmed control points, sensors and end limit
settings and resets the driven product's favourite (my) position.
1] Position the driven product at its half-way position.
2] Cut the power supply for 2 seconds.
3] Switch the power supply back on for 5 to 15 seconds.
4] Cut the power supply for 2 seconds.
5] Switch the power supply back on: the driven product moves for a few
seconds.
6] Press the PROG button on the Somfy io-homecontrol® local control point
for ≈ 7 s until the driven product moves up and down two times: the drive is
reset to its original configuration.
4.USE AND MAINTENANCE
NOTICE
This drive does not require any maintenance operations.
4.1.Up and Down buttons
Briefly pressing the Up or Down button causes the motorised product to rise or
lower fully.
4.2.Stop function
The motorised product is moving.
Briefly press my:
→The motorised product stops.
4.3.Favourite position (my)
NOTICE
An intermediate position, which is called the "favourite (my) position" and is different from the upper and lower
positions, can be programmed.
NOTICE
Only one favourite (my) position is permitted.
©
Copyright
2022 SOMFY ACTIVITES SA. All rights reserved.
1]
2]
2 s
3]
4]
ON
ON
15 s
2 s
5]
ON
ON
6]
0.5 s
0.5 s
0.5 s
EN
OFF
OFF
13
Werbung
Inhaltsverzeichnis
