System Components - Dantherm Simplify Kurzanleitung Zur Installation

Safety
Danger of injury and explosion!
Incorrect use can cause liquid to leak from the battery, which is harmful to the skin, eyes and
mucous membranes. An incorrectly inserted battery may explode!
• When inserting the battery, ensure that the positive and negative terminals are inserted
• Never open the battery and never dispose of the battery in a fire.
• In case of contact with leaking liquid, rinse immediately with water. If the liquid gets

System components

The Simplify system includes several hardware and software components:
Simplify Control Unit
Simplify Sensor Box
Simplify Sensor Probe –
IAQ
Simplify Sensor Probe –
Resistive
Simplify Sensor Probe –
RH/TEMP
Simplify Relay Box
Simplify Integration Box Unit for integration of a mobile Dantherm CDT MKII and MKIII
Simplify App
Simplify Dashboard
The main components of the Simplify system are depicted in figure 1. The contents of the
Unpacking system
case may vary. Check the case and Simplify components for proper condition before use.
components
WARNING
correctly.
into your eyes, seek additional medical attention.
A control unit for the control and radio connection of
Simplify components.
Unit for connecting a Simplify Sensor Probe and for radio connection
with the Simplify Control Unit.
Cable with sensor head for air quality (TVOC [µg/m
Available in 24 cm length.
Cable with sensor head for water content in materials [%]. Available in
24 cm length.
Cable with sensor head for temperature [°C] and relative humidity [%].
Available in 24 cm, 300 cm and 2000 cm length.
Relay with 3 socket outlets. Available with different plug types for
184-265 V AC.
condensing dehumidifier.
Smartphone application that is used for scanning Simplify compon-
ents and registration of the system. Supports iOS and Android.
Online platform for presentation of data and generation of reports as
well as remote control of some Simplify components.
3
], eCO2 [ppm]).
9