Disassembly And Disposal - Dantherm simplify Kurzanleitung Zur Installation

Disassembly and Disposal

Complete the
project
Disassembly
Disposal
12
When a project is completed, it must be archived using the app. Otherwise, when there is no
power supply via the mains plug, the Simplify Control Unit will continue to operate with the
backup battery.
1. Scan the QR code of the Simplify Control Unit and press "ARCHIVE" in the app (Fig. 9).
ð The Simplify Control Unit is switched off by the "Cloud" after a maximum of
10 minutes.
ð The successful archiving can be checked in the Simplify Dashboard under:
https://simplifyclimatesolutions.com
The Simplify Sensor Box switches off when the Simplify Sensor Probe is unplugged.
1. Unplug the mains plugs of the Simplify Control Unit and the Relay Boxes from the socket
outlets (Fig. 10).
2. Unplug and collect all other components. Remove the Simplify Sensor Probe from each
Simplify Sensor Box (Fig. 11).
3. Stow all the components in the case (Fig. 12).
The product does not belong in household waste and must be disposed of separately in
accordance with the applicable statutory regulations. For more information, please refer to
the operating instructions.