Troubleshooting - Siguro Sgr-Rv-L650B Bedienungsanleitung

4. Clean the brush bay with a dry cloth and check the suction aperture for
obstructions.
5. Replace the rotary brush in its mounting, then replace the cover plate.
Cleaning the Vacuum Body and Charging Station
Wipe the outer body of the vacuum and the charging station with a clean, dry cloth.
Turn the vacuum upside down and remove any hair and dirt that may have become
entangled in the castors.
Storage
Before putting the vacuum into storage, make sure it is clean, the dustbin is empty
and clean, and filters are clean and properly installed. Store the appliance in a dry and
well-ventilated place out of the reach of children or pets. Do not place any objects on
the appliance.
During long storage, charge the battery once every 3 months to prolong its life.

TROUBLESHOOTING

Problem
Vacuum keeps going in reverse
Vacuum will not power on
Automatic charging not working
Vacuum not charging
Solution
Check:
• ambient light is not too strong;
• surface being cleaned is not a black
carpet;
• condition and cleanliness of sensors on
device bottom; clean if required;
• wheels are not stuck; clean if required.
Check:
• main power switch on device bottom;
set to I (on) if not so already;
• charge level; charge if necessary.
Charge the battery.
Check:
• charging station status LED is lit;
• vacuum has obstacle-free path to
charging station;
• vacuum did not run out of power
before reaching station; plug in
manually if it did.
Dock the vacuum with the charging sta-
tion before beginning a cleaning cycle.
Verify that you are using the original
power adapter and it is correctly plugged
into the mains.
If you believe the battery may be dam-
aged, contact an authorized service
center.
EN - 19
EN