Notes:
•
The vacuum may intrude upon a no-go zone in cases where its
navigation fails, due to faulty sensors, etc.
•
Persistent no-go zones may be automatically cleared when furniture
or the charging station is moved. Do not move the charging station
and avoid lifting, turning, or manually moving the vacuum while it is
operating.
•
The vacuum will rebuild its internal area map following such actions,
which will clear all existing no-go zones.
Virtual Wall
You can define imaginary walls to serve as obstacles the vacuum will not cross.
1.
In the app, go to "Area cleaning", then tap "Set wall".
2. Tap "Wall", then tap "Add" in the bottom right corner. Tap "Save" once you have
configured your wall.
3. Once done cleaning, the vacuum will automatically return to the charging station.
4. To clear a virtual wall:
• Go to "Area cleaning", then tap "Set wall".
• Tap "Wall", then tap the wall you want to clear.
• Tap the X on the wall and save. The virtual wall will be cleared (deleted).
Planned Cleaning
The app allows you to plan a time for cleaning. The vacuum will activate at the set
time.
In the app, tap the Settings icon at top right, then follow the app's instructions.
Manual Cleaning
In the app, tap the Settings icon at top right, then follow the app's instructions to man-
ually activate the vacuum.
Other App Features
•
Reset internal area map
•
Set suction power: Mute, Normal, Strong
•
Set water flow for wet cleaning: Fast, Medium, Slow
CLEANING AND MAINTENANCE
Before any cleaning or maintenance, first power off the appliance and unplug the
adapter from the wall socket.
For best cleaning efficiency and service life, the vacuum should be cleaned after each
use.
Warning:
Never immerse the appliance, charging station, or adapter in water or
other liquids.
Never clean any part of the appliance with plastic or metal scrapers, harsh cleaners,
chemicals, hydrocarbon cleaners, solvents, or similar substances. The surface finish
could be seriously damaged.
EN - 17
EN