Iso 9001-Zertifikat; Software-Lizenzvereinbarungen; Ul-Zulassung - Siemens SIMATIC IOT2020 Betriebsanleitung

ISO 9001-Zertifikat

Das Qualitätssicherungssystem unseres gesamten Produktentstehungsprozesses
(Entwicklung, Produktion und Vertrieb) erfüllt die Anforderungen der ISO 9001.
Dies wurde uns vom TÜV Rheinland bestätigt.

Software-Lizenzvereinbarungen

Wenn das Gerät mit installierter Software geliefert wird, dann beachten Sie die zugehörigen
Lizenzvereinbarungen.

UL-Zulassung

Für das Gerät liegen folgende Zulassungen vor:
• Underwriters Laboratories (UL) nach Standard UL61010-2-201 (IND.CONT.EQ),
File E472609
• Canadian National Standard CAN/CSA-C22.2 No. 142 und CAN/CSA-C22.2 No. 61010-2-
201
FCC und Kanada
USA
Federal
Communications
Commission
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
CANADA
Canadian Notice
Avis Canadien
RCM AUSTRALIA/NEW ZEALAND
This product meets the requirements of the standard EN 61000-6-4:2007 Generic standards –
Emission standard for industrial environments.
SIMATIC IOT2020, SIMATIC IOT2040
Betriebsanleitung, 07/2022, A5E37656491-AC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003 (A).
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 (A) du Canada.
Technische Angaben
7.1 Zertifikate und Zulassungen
37