iFactory3D One Pro Einrichtungsanleitung Seite 6

V_97971.03
Delivery contents
Please check your delivery for completeness before you start the assembly.
If any components are missing or damaged, contact
Parts included

iFactory3D One Pro 3D belt printer

Allen keys 1.5; 2; 2.5; 3 and 4 [mm]

Wrench 5.5 mm for M3 nuts

Power cable

Plug to cover PSU voltage input:
Input voltage
Make sure the selected input voltage is matching the voltage of your local power grid before
turning the machine on.
It can be switched between 110V and 220V.
Note: Labelling can be different for each machine. "110V" supports all voltages from 100V
up to 120V [US standard], while "220V" supports all voltages from 220V up to 240V [EU
standard].
Both 50Hz and 60Hz are supported.
The number that is shown on the red switch is the selected voltage.
support@ifactory3d.com
6
immediately.