10. Maintaining and cleaning the unit
10.1 Check and maintain the unit regularly
What do you have to do?
Check all cables and plugs for damage.
Check the socket of the lamp for tightness.
Check softbox for correct mounting.
WARNING
Electric shock hazard and fire hazard, caused by a short circuit
In case of damage, have the unit repaired by a qualified electrician right away.
10.2 Cleaning
WARNING
Danger of cutting and splintering, due to shattering or bursting
lamp later on.
■ Do not drop the lamp.
■ Always hold the lamp by the plastic socket or with a clean cloth or with clean gloves.
WARNING
Risk of electric shock
■ Never allow the unit to come into contact with moisture or water.
■ Always unplug the unit before cleaning it.
Unit
Cleaning
Housing
Remove light and stubborn dirt carefully with a damp cloth.
Lamps
Dab with a dust brush or dry, soft cloth.
Softbox
Remove light and stubborn dirt with a dry or damp cloth.
NOTICE
Do not clean the lamps with water. Even a small amount of residue on the
can cause the bulbs to burst.
Before each
With every
use
change
X
X
X
35