Stahl SolConeX 8570/15-3 Serie Betriebsanleitung Seite 40

Mounting and Installation
EN
EN
B
EN
EN
EN
EN
EN
Main contacts
EN
Auxiliary contacts
EN
EN
EN
EN
EN
EN
EN
Installation of auxiliary contacts
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
18
SolConeX Flange Socket, 16 A
Series 8570/15
20631E00
B [mm]
10
6
16027E00
11202E00
• Open the enclosure.
• Strip the conductors.
• Insert the conductors into
the corresponding terminals
and clamp them
(for tightening torque,
see chapter "Technical data").
Insert the stripped cable ends
completely under the terminal.
• Check if the conductors have
been clamped properly.
• Align the conductors. Make sure
that the clamping points are not
under tension.
• Close the enclosure
(for the tightening torque,
see chapter "Technical data").
• Open the enclosure.
• Lead the cable through the cable
gland into the connection chamber.
• Unlock the screwless type terminals
by means of a screwdriver (2)
(cutting edge 06 x 3.5 form A
according to DIN 5264 or
ISO 2380-1).
• Insert the conductors in the
corresponding screwless type
terminals and clamp them (3).
The stripped conductor ends
must be fully inside the terminal.
• Align the conductors (the clamping
units must not be under tension).
• Close the enclosure
(for the tightening torque,
see chapter "Technical data").
271614 / 8570642300
2020-02-06·BA00·III·en·00