Technical Data - Edesa EGG-1240 TI TR CI N Bedienungs- Und Wartungsanleitung

Technical data

Technical Information About Gas Burners
(G20-20 mbar) - (G30/G31; 28-30 /37mbar)
Burner A Burner SR
1 kW 1.75 kW
G30-30 G30-30
Mbar LPG Mbar LPG
(0.50 mm) (0.65 mm)
G20-20 G20-20
Mbar NG Mbar NG
(0.72 mm) (0.97 mm)
1. Nitrile/Cylinder head seal
2. Elbow
3. LPG hose inlet
When performing natural gas-LPG conversion, please use the LPG hose inlet shown
in the figure to complete the conversion.
Pots with larger diameters than indicated might cause the adjustment knob to
overheat as shown. Edesa shall not accept any responsibility for damages resulting
from such incorrect use.
For burners near the buttons, please do not use pots with larger diameters than the
indicated values to prevent the buttons from overheating.
Burner R Wok Burner
3 kW (2.5 kW)
G30-30 G30-30
Mbar LPG Mbar LPG
(0.85 mm) (0.82 mm)
G20-20 G20-20
Mbar NG Mbar NG
(1.15 mm) (1.15 mm)
17
Wok Burner Wok Burner
(3.8 kW) (4 kW)
G30-30 G30-30
Mbar LPG Mbar LPG
(0.98 mm) (1.01 mm)
G20-20 G20-20
Mbar NG Mbar NG
(1.35 mm) (1.50 mm)