Reasons For Glass Breakage And Damage - Edesa EGG-1240 TI TR CI N Bedienungs- Und Wartungsanleitung

To turn on plate:
Considering the cooking type and food amount, and using the table below, turn the control
knob to the left to set it to the suitable position for the food you want to cook. The red
warning light will become on when the knob is set to any position other than the off position.
To turn off plate: Turn the control knob to position "0". The warning light will go off.
Power control knob 3+1
1
Low
2
Medium
3
Large
The recommended settings are for guidance purposes. You must increase the power in the
following cases:
- When you are cooking with a high amount of liquid
- For large servings
- When you are cooking with pots with no lid
Recommendations
If the surface of the hotplates wear off due to long terms of use, use a few drops of oil or
other commercially available care products to clean them.
It is recommended to set the control knob to the highest level at the beginning of the cooking
process and cook the food at interim levels depending on the features and amount of the food.
*Never use the electrical plate without a suitable pot under any circumstances.
This might lead to fire, especially if the cooking process takes a long time.
*Take all the measures to prevent fluids from flowing on the hotplate when it is hot.
*Use pots that have a flat bottom with a suitable diameter that covers the whole
hotplate surface.
Knob position Cooking measures
0 Off
1 For melting (butter, chocolate, etc.)
For keeping meals warm and heating fluids.
2 For heating leftovers, making sauce and cream, preparing slow-cooker
meals such as pasta, soup, pilaf, beef and fries.
3 For frying meat and fish, preparing potatoes and well-boiled meals, frying
ingredients quickly and preparing well-done meat.

Reasons for glass breakage and damage

1. Impacts and/or residues, deep scratches due to any reason.
2.Possible impacts on the edges of the hob glass when shopping for pots
Keep warm
Quick heating and cooking
Frying
5